Porsche 993 Turbo GT2 K24 Turbo kit

€5.500,00excl. VAT€6.655,00incl. VAT (21%)

✓ Made to order

✓ Ready to ship

✓ 2-year warranty

✓ Worldwide shipping

Questions or doubts? We do it all! Please let us know how we can help optimize your Porsche. We fear no challenge.

€5.500,00excl. VAT€6.655,00incl. VAT (21%)

Porsche 993 Turbo GT2 K24 Turbo Kit, Faster Spool, More Power, Proven Motorsport Engineering

The Porsche 993 Turbo is already one of the most compelling performance cars of its era, a car with genuine supercar performance credentials wrapped in the most refined air-cooled 911 bodywork Porsche ever produced. But the factory turbocharger configuration is a balance point designed around emissions, cost and broad market appeal, not maximum performance. The DRS Development GT2 K24 Turbo Kit for the Porsche 993 Turbo is based on Porsche’s own GT2 turbocharger specification, the motorsport-derived configuration used in one of the most celebrated competition 911s ever produced, delivering faster spool, stronger mid-range torque and higher top-end power while preserving the reliability and drivability that a serious fast-road and track car demands.

Why Choose This Porsche Part?

  • Based on Porsche’s GT2 turbocharger configuration, not an aftermarket interpretation but a kit that references the same turbocharger technology that Porsche used in the 993 GT2 competition and road car, providing proven aerodynamic characteristics and boost delivery that have been validated in genuine motorsport conditions.
  • K24 units provide improved airflow compared to stock turbos, allowing the engine to produce more boost with less heat and internal stress, improving both peak power and the thermal margins that protect the engine and turbocharger system during sustained hard use.
  • DRS Development matches the turbos to your specific engine specification and supporting hardware, ensuring smooth boost delivery and stable air-fuel ratios throughout the operating range, power you can actually use rather than a peak figure that disappears in practice.
  • Less than 1,500 kilometres since rebuild on the turbochargers supplied with this kit, effectively new units with zero fatigue, proven correct operation and the peace of mind that comes from knowing exactly what condition the core performance components are in.

Performance and Tuning Benefits

The factory 993 Turbo uses turbochargers that were specified for the production car’s power targets, packaging constraints and emissions requirements. They produce strong performance, but they also exhibit the turbo lag characteristics associated with larger, less responsive units, a noticeable delay between throttle input and full boost that requires the driver to plan inputs in advance and makes the power delivery feel sequential rather than progressive. The K24 turbocharger configuration addresses this directly. The K24 units spool faster because their turbine and compressor wheels are aerodynamically optimised for quicker response at lower exhaust gas velocities, which means boost arrives earlier in the rev range and the transition from off-boost to on-boost is shorter and more progressive. The result is a car that responds to throttle input with greater urgency from a lower engine speed, transforming the driveability of the 993 Turbo in the mid-range conditions where road and track driving mostly takes place. Higher top-end power comes from the K24’s improved airflow capacity at high boost pressure, the units can flow more air efficiently at the upper end of the pressure range, which allows more boost to be carried higher in the rev range without the heat and stress penalties that less efficient units incur at high boost. DRS Development’s role in the installation and calibration of this kit is critical. Matching the turbocharger specification to the engine’s compression ratio, cam timing, intercooler capacity and fuelling system is the engineering work that determines whether a turbo kit produces the power its specifications promise in real-world conditions. The DRS Development setup process ensures boost delivery is smooth and stable, air-fuel ratios are consistent across the operating range and the engine management is calibrated to extract the full benefit of the upgraded turbocharger configuration safely.

Technical Specifications and Build Details

  • Application: Porsche 993 Turbo, twin-turbo 3.6-litre flat-six
  • Configuration: GT2-based K24 turbocharger kit
  • Turbocharger condition: Less than 1,500 km since rebuild, effectively new units
  • Additional content: Turbochargers plus extra spare parts for 993 Turbo included
  • Performance improvements: Faster spool, stronger mid-range torque, improved top-end power
  • Airflow: Improved compared to stock turbochargers, more efficient at high boost pressure
  • Heat management: Better efficiency means less heat generation at given boost levels
  • Setup: DRS Development matches turbos to engine specification for correct boost delivery and air-fuel ratios

The condition of the turbochargers in this kit deserves specific attention. Turbochargers that have accumulated significant mileage develop bearing wear, shaft seal degradation and wheel erosion that reduces efficiency and ultimately causes failure. With less than 1,500 kilometres since rebuild, these units are in as-new mechanical condition, bearings fresh, seals intact, wheels clean and balanced. For a buyer fitting a turbo kit, knowing the exact condition and history of the turbocharger units is as important as knowing the specification, and the low post-rebuild mileage on these units eliminates any uncertainty about their mechanical state.

OEM Quality and Porsche Compatibility

This kit is based on the Porsche GT2 turbocharger specification and is installed in the 993 Turbo by DRS Development with full knowledge of the 3.6-litre twin-turbo engine architecture. DRS Development handles the matching of turbocharger specification to engine configuration and supporting systems, including intercooling, fuelling and engine management calibration. The installation approach prevents the boost spikes, poor drivability and excess heat generation that can result from turbo kit installations that have not been correctly matched and calibrated.

Upgrade Your 993 Turbo Today

If you want your Porsche 993 Turbo to respond faster, pull harder and deliver more performance with the reliability that serious use demands, the DRS Development GT2 K24 Turbo Kit is the upgrade that achieves it. Contact DRS Development today to discuss your engine specification and arrange installation.

Frequently Asked Questions

  • What is the GT2 turbocharger configuration and why is it relevant to this kit? Porsche’s 993 GT2 was a high-performance homologation variant that used a specific turbocharger configuration developed in conjunction with the factory motorsport programme. The GT2 configuration is known for its balance of response and power output, and forms the basis of this K24 kit’s design.
  • What power output can be expected from the K24 turbo kit? Power output depends on the supporting modifications, boost pressure and engine management calibration used with the kit. DRS Development will provide specific power output expectations based on the complete package specification during the installation consultation.
  • Does the kit require any additional supporting modifications? DRS Development assesses the supporting hardware, intercooling, fuelling, engine management, during the installation consultation and will advise on any additional modifications required to support the increased airflow and boost pressure of the K24 units safely.
  • Why is the low post-rebuild mileage on the turbochargers important? Turbocharger condition directly affects spool characteristics, peak efficiency and longevity. Units with fresh bearings, seals and balanced wheels perform to their design specification rather than a degraded approximation of it. The low post-rebuild mileage gives the buyer confidence that the turbocharger units are performing exactly as specified.
  • Is engine management recalibration required after fitting the kit? Yes. Changing the turbocharger specification changes the boost delivery characteristics, airflow and thermal behaviour of the engine, all of which require ECU recalibration to achieve correct fuelling and timing. DRS Development handles this as part of the installation service.
  • Does the kit include spare parts for the 993 Turbo? Yes. The kit includes extra spare parts for the 993 Turbo alongside the K24 turbocharger units, providing additional security for buyers who want to maintain their own cars or have spare components available for track use.

Explore More Porsche Parts and Upgrades

The K24 turbo kit works best as part of a complete engine performance package. Explore more DRS Development upgrades for your Porsche 993 Turbo:

Questions about this product?

Contact us

Not sure if this fits your exact model, or have a question about fitment, delivery, or warranty? Fill in the form and our team will get back to you within one working day.

Dorpenbaan 9-11, Rijen