Porsche 911 3.2 Highspark Engine

€26.859,50excl. VAT€32.500,00incl. VAT (21%)

✓ Made to order

✓ Ready to ship

✓ 2-year warranty

✓ Worldwide shipping

Questions or doubts? We do it all! Please let us know how we can help optimize your Porsche. We fear no challenge.

€26.859,50excl. VAT€32.500,00incl. VAT (21%)

Porsche 3.2 Highspark High Compression Twin-Spark Engine, The Ultimate Classic Flat-Six from DRS Development

The DRS Development 3.2 Highspark is not a standard engine build. It is a ground-up performance specification flat-six that combines a 1987 930-series closed case with a collection of carefully selected, purpose-modified components to produce an engine that is smaller in displacement than many alternatives but far more developed, a high-compression, twin-spark design that delivers strong power, exceptional throttle response and the mechanical precision of a properly engineered performance build. Designed to be the ideal foundation for a drive-by-wire or individual throttle body induction system, the Highspark is the engine for owners who understand that displacement is not the only path to performance and that engineering quality is the most important variable of all.

Why Choose This Porsche Engine?

  • The twin-spark head design, featuring an additional spark plug hole in each cylinder head, provides two ignition points per cylinder, improving combustion completeness and flame front propagation for stronger, more efficient combustion that generates better power and response from a given displacement than a single-spark design can deliver.
  • CP 10.4:1 custom pistons provide a high compression ratio that, combined with the twin-spark ignition and 964 specification valve sizing, creates a combustion environment optimised for maximum volumetric and thermal efficiency, the correct approach to naturally aspirated performance that works in harmony with the engine’s other specifications rather than fighting against them.
  • The 930 closed case foundation at 0.25mm oversize with zero offset on bearing housing provides the precise dimensional starting point that every other component in the build depends on, a case that is dimensionally correct and holds bearing clearances properly rather than one that requires compromised specifications to work with its own inaccuracies.
  • Designed specifically as an ideal foundation for DBW or ITB induction builds, the Highspark’s combination of high compression, revised combustion chamber geometry and twin-spark ignition makes it the engine specification that responds most dramatically to the precision throttle control and improved breathing of a modern induction system.

Performance and Build Details

The Highspark build begins with a 1987 930 closed case that has been bored to 0.25mm oversize with zero offset on the bearing housing, a specific dimensional specification that gives the build the precise foundation it needs to achieve correct bearing clearances throughout. Shot-pinned 964 connecting rods are used in combination with the 3.2 crankshaft maintained at standard size on all journals, providing the combination of 964’s improved connecting rod specification and 3.2’s proven crank geometry in a bottom end that is correctly balanced for the intended power and RPM targets. CP custom pistons at 10.4:1 compression ratio are specified for the Highspark build, not a standard catalogue piston but a custom specification that is matched to the bore dimensions, deck height and combustion chamber volume of this specific engine to achieve the target compression ratio accurately. New Mahle cylinders are fitted with a custom head gasket system developed by DRS Development, a sealing solution that handles the increased cylinder pressures of the high-compression specification reliably and maintains consistent clamping force across the temperature range of real-world operation. The cylinder heads receive comprehensive work: revised with 964-specification valve sizing, which is larger than the 3.2 standard and improves airflow capacity at the chamber entry, plus a degree of porting work to optimise flow characteristics. All new bearings, all new gaskets and a 964 oil pump that provides improved flow and pressure compared to the 3.2 unit complete the internal specification. Dilivar studs and ARP connecting rod bolts ensure that the critical fasteners in the engine are appropriate for the power and compression loads involved, not compromise components, but specified hardware chosen for the specific application. The 964 camshafts fitted to the Highspark are modified from standard specification to complement the high-compression combustion chamber geometry and the twin-spark ignition timing, delivering a cam profile that works in harmony with the rest of the build rather than being a standard component in a non-standard context.

Technical Specifications and Build Details

  • Base case: 3.2 930 closed case, 1987, 0.25mm overbore, zero offset on bearing housing
  • All parts checked and vaporblasted
  • Connecting rods: 964 shot-pinned, balanced
  • Crankshaft: 3.2, standard size on all journals (con rod and main)
  • Pistons: CP custom 10.4:1 high compression
  • Cylinders: New Mahle with custom DRS Development head gasket system
  • Cylinder heads: Revised with 964 specification valve sizing and porting work
  • Bearings: All new
  • Gaskets: All new
  • Oil pump: 964 specification for improved flow and performance
  • Ignition: Twin-spark head with additional spark plug hole per cylinder
  • Head fasteners: Dilivar studs
  • Con rod fasteners: ARP bolts
  • Camshafts: 964 modified specification
  • Supply scope: Long motor, crankshaft to valve covers (price for complete engine available on request)
  • Ideal induction systems: DBW drive-by-wire or ITB individual throttle body

The choice of ARP connecting rod bolts is a specification detail that reflects the Highspark’s intended operating envelope accurately. Standard con rod bolts are designed for the factory torque and RPM limits of a production engine. ARP bolts are specified for performance applications where the combination of higher RPM, higher combustion pressures and the cyclic loads of hard driving create fastener stresses that standard hardware cannot maintain safely across many thousands of cycles. On a 10.4:1 compression engine designed for performance induction systems and serious use, ARP bolts are the correct specification.

OEM Quality and Porsche Compatibility

The Highspark long motor uses a combination of OEM Porsche components, improved OEM-specification parts from premium suppliers and purpose-designed DRS Development components where they outperform available alternatives. Every component choice is made with compatibility and reliability in mind alongside performance, the Highspark is designed to be a long-lasting performance engine, not a racing engine that requires constant maintenance to remain reliable. The long motor is supplied ready for installation with your choice of induction system, ignition system and ancillaries.

Commission Your Highspark Build Today

If you are building a Porsche 911 with a DBW or ITB induction system and want an engine that is engineered to match the sophistication of your induction choice, the DRS Development 3.2 Highspark is the foundation that makes everything else work at its best. Contact DRS Development today to discuss specification, pricing for the complete engine option and build timelines.

Frequently Asked Questions

  • What is the advantage of twin-spark ignition on a high-compression Porsche flat-six? Twin-spark ignition fires two spark plugs per cylinder simultaneously, creating two flame fronts that meet in the middle of the combustion chamber. This improves combustion completeness, reduces the tendency for knock under high compression and allows more aggressive ignition timing for improved power and efficiency compared to a single-spark design at the same compression ratio.
  • Why is the 930 closed case chosen as the basis for this build? The 930 closed case has a specific structural architecture that DRS Development considers appropriate for this combination of displacement, compression ratio and intended induction systems. The 1987 example used has been selected for its dimensional accuracy and overall condition before the build commences.
  • What induction systems is the Highspark designed to work with? The Highspark is specifically designed as the ideal engine foundation for drive-by-wire throttle systems and individual throttle body induction, both of which benefit from the high-compression, twin-spark combustion character of this engine. DRS Development can supply and install complete DBW or ITB induction systems alongside the engine build.
  • What power output does the Highspark produce? Power output depends on the induction system, exhaust and engine management calibration fitted to the engine. DRS Development will provide realistic power targets for the complete engine specification during the build consultation, based on experience with comparable builds.
  • Is the Highspark supplied as a long motor only or as a complete engine? The standard Highspark is supplied as a long motor, from crankshaft to valve covers, allowing the owner to specify their own induction, ignition and ancillary systems. Complete engine pricing including induction and ancillaries is available on request from DRS Development.
  • Can the Highspark specification be adapted or further developed for specific power targets? Yes. DRS Development can discuss modifications to the base specification, camshaft profiles, compression ratio, bore size, for owners with specific power and character targets. The Highspark specification is a strong foundation that can be developed further within the constraints of the 930 case architecture.

Explore More Porsche Parts and Upgrades

The Highspark long motor is the beginning of a complete high-performance Porsche build. Explore DRS Development components to complete your engine and chassis:

Questions about this product?

Contact us

Not sure if this fits your exact model, or have a question about fitment, delivery, or warranty? Fill in the form and our team will get back to you within one working day.

Dorpenbaan 9-11, Rijen